16mm Spigot
German 9x12 Cavity Fitting
Dovetail
Adapters offer alternative solution for overcoming space and access limitations and are available upon request.
1. Place the end fitting to the extension adapter.
2. Then attach to the square drive of the wrench.
3. Measure and note distance “E” from the center
of the end fitting to the wrench square drive.
Note!
Extension Adapters cannot be used with the ADS4, ADS8, ADS12D.
When using extension spanners or adapters, the torque applied to the fastener is greater than that shown on the torque wrench dial. To calculate the increase, please use this formula.
Sq. Dr. | Item # | Item # | Item # |
3/8” | 20-A96102 | 20-A96112 | 20-A96122 |
1/2” | 20-A96103 | 20-A96113 | 20-A96123 |
