Accuracy ± 0.5% of reading from 20% to 100%
Accuracy ± 1% of reading from 10% to 20%.
Torque Analyzer is recommended for all small hand tools & non-impacting power tools.
Features a built-in transducer and graphic display.
Selection of two operation modes: (Track, Peak).
Four units of torque measurement available:
(lbf.in, cN.m, N.m, kgf.cm.)
Switchable 110V and 220V.
Four digit display.
Torque Analyzer operational in: English, Spanish, French, German, Italian and Chinese.
Selectable filters to eliminate unwanted “noise” :
(500Hz, 1000Hz, 1500Hz, 3000Hz).
RS-232 interface to download readings in "real time."
"Flash" memory allows upgrades to be done by the user or via the internet.
Includes three PC Windows based software programs:
EZ Terminal - for updating firmware, selecting
torque direction and changing languages.
EZ Calibration - for multipoint calibrations.
Data Acquisition -collecting and analyzing data with
Microsoft Excel®.
Includes a Spring Run Down Adapter.
Torque Tester includes a Case, RS-232 cable, Universal Charger, and 1/4" Female/Hex Square Drive Adapter.
Two methods of calibration are provided, a single point calibration (using a manual pot adjustment) and a multipoint calibration using EZ Calibration software.
Torque Ranges
*This unit includes a 1/4" Female/Hex Square Drive Adapter that slides into the socket.
Also, a Spring Run Down Adapter for dynamic power tools.
Model | Item # |
lbf.in | cN.m | kgf.cm | Drive Size | Weight |
EZ-TorQ 10i | 070500 | 1 - 10 | 11.3 - 113 | 1.2 - 11.5 | 17mm Female/Hex* | 4.5 lbs. |
EZ-TorQ 50i | 070505 | 5 - 50 | 56.5 - 565 |
5.8 - 57.6 | 17mm Female/Hex* | 4.5 lbs. |
EZ-TorQ 100i | 070510 | 10 - 100 | 113 - 1130 | 11.5 - 115 | 17mm Female/Hex* | 4.5 lbs. |
EZ-TorQ 150i | 070515 | 15 - 150 | 169.5 - 1695 | 17.3 - 173 | 17mm Female/Hex* | 4.5 lbs. |
Calibration Test Equipment:
For Torque Analyzers & Torque Sensors.
Calibration Hex Step Adapter: Allows multiple size wrenches to be used with one adapter.
Aura
(Auto Revering Run Down Adapters)
Once the tool shuts off, the AURA automatically unwinds for the next run down. Eliminates the need to back it out.
Note!
Since a tester cannot always duplicate actual joint characteristic, the torque reading displayed on the EZ-TorQ may vary from the actual torque that a tool will apply to a joint. A run down adapter that simulates a variety of different joint characteristics is
provided with the EZ-TorQ. When critical assemblies are involved, the torque output of the power tool being used should be verified on the actual assembly using a calibrated measuring torque tool.
Supplied with NIST-Traceable
Certification of Calibration
Standard accessories include:
Spring Run Down Adapter
Universal Charger
RS-232 Cable
1/4” Female/Hex Square Drive Adapter
Mountz Software Programs
Case
Certified
