System Accuracy +/- .5% of reading from 20% to 100% of full scale.
System Accuracy +/- 1% of reading from 10% to 20% of full scale.

Operates with Torque & Force sensors.

Recommended for all hand screwdrivers, wrenches or power tools.

Provides “EZ-Plug & Play” with Mountz Transducers. Features “ARCII” technology, an instant auto-recognition system of the transducer connected to the PTT. 

Selection of six/seven* operating modes: (Track, Peak, First Peak, Audit, Bolt Audit*, Spindle Audit and Torque + Angle).

   *The Bolt Audit Mode is an additional feature that is only
   available with PTT Bold Audit Model (Item #072995).

Five low-pass filter selections (3000, 2000, 1500, 500 and 200 Hz).

Six-digit display. and easy to use menu structure.

Two units of force measurements: (lbf and kN)

Features built-in Tool Tests operation.

Real Time Clock for time stamping of readings.

USB interface to download readings to PC.

Stores a total of 5000 data points.

Real time graph of torque vs. time using associated PC Windows software.

Display Accuracy is better than +/- 0.0625 of reading.

Seven units of torque measurements: (ozf.in, lbf.in, lbf.ft, cN.m, N.m, kgf.m, kgf.cm).

Features a Go / No Go LEDs that illuminate when high or low setting is achieved.

The 5VDC capability allows unit to be used with a Brushless Rotary Transducer for testing pulse tools and high RPM tool.

 

Includes three PC Windows based software programs:
  Mountz Torque Meter Interface Program - for sensor calibrations, meter calibration and tool tests.
  Torque Meter Bootloader - for updating the PTT operating systems.
  “Excel Add-In" - for Real-Time data collection into an Excel spreadsheet. It also provides statistics calculations.

“Flash" memory allows upgrades to be done by the user in the field & internet through the USB port.

High Capacity Li-Ion Batteries for long life (30 hrs with standard transducers and 16 hrs with brushless rotary).

Can connect to most mv/v transducers and can store calibration data for up to 50 non-smart torque sensors.

Torque and Angle data is displayed simultaneously when used with Torque and Angle transducers, up to 8000 RPM for angle measurement.

 

PTT-2000 -
Item # 072999

PTT-2000 Bolt Audit Model
(for HSD Torque Multipliers)-
Item # 072995      

Note!
Since a tester cannot always duplicate actual joint characteristic, the torque reading displayed on the PTT may vary from the actual torque that a tool will apply to a joint. When critical assemblies are involved, the torque output of the power tool being used should be verified on the actual assembly using a calibrated measuring torque tool.

Legal   |   Copyright © 2008 Mountz Incorporated   |   Login