Accuracy +/- 0.25% of full scale.
Use Torque Sensor with
most hand tools, power tools or rotational measurement applications.
Connects between the power tool and the joint. Monitors actual torque being applied from the driver to the fastener.
Features ARC II technology, an instant auto-recognition system of the RTSX connected to the LTT or PTT
Bi-directional.
Torque Ranges
Model | Item # |
American | S.I. | Input Dr. | Output Dr. |
RTSX10i-H | 170200 | 1 - 10 lbf.in | 11.3 - 113 c.Nm | 1/4 M/Hex | 1/4 F/Hex |
RTSX10i | 170201 | 1 - 10 lbf.in | 11.3 - 113 c.Nm | 1/4 F/Sq | 1/4 M/Sq |
RTSX50i-H | 170202 | 5 - 50 lbf.in | 56.5 - 565 c.Nm | 1/4 M/Hex | 1/4 F/Hex |
RTSX50i | 170203 | 5 - 50 lbf.in | 56.5 - 565 c.Nm | 1/4 F/Sq | 1/4 M/Sq |
RTSX100i-H | 170204 | 10 - 100 lbf.in | 113 - 1130 c.Nm | 1/4 M/Hex | 1/4 F/Hex |
RTSX100i | 170205 | 10 - 100 lbf.in | 113 - 1130 c.Nm | 1/4 F/Sq | 1/4 M/Sq |
RTSX200i-H | 170206 | 20 - 200 lbf.in | 226 - 2260 c.Nm | 1/4 M/Hex | 1/4 F/Hex |
RTSX200i | 170207 | 20 - 200 lbf.in | 226 - 2260 c.Nm | 3/8 F/Sq | 3/8 M/Sq |
RTSX50F | 170208 | 5 - 50 lbf.ft | 6.8 - 67.8 N.m | 3/8 F/Sq | 3/8 M/Sq |
RTSX100F | 170209 | 10 - 100 lbf.ft | 13.6 - 135.6 N.m | 1/2 F/Sq | 1/2 M/Sq |
RTSX400F | 170210 | 40 - 400 lbf.ft | 54.2 - 542.4 N.m | 3/4 F/Sq | 3/4 M/Sq |
RTSX738F | 170211 | 74 - 738 lbf.ft | 100 - 1000 N.m | 1 F/Sq | 1 M/Sq |
RTSX1500F | 170212 | 150 - 1500 lbf.ft | 203.3 - 2033 N.m | 1 1/2 F/Sq | 1 1/2 M/Sq |
RTSX Cable
RTSX Pin Connection
A = Excitation (+)
B = Excitation (-)
C = Output (-)
D = Output (+)
E = Shield
F = 100% control (Full Scale)
RTSX Transducer - Specifications
Output at Rated Capacity: </= 6 Nm [53 lbf.in] rated torque 1 mV/V
> 6 Nm [53 lbf.in] rated torque 2 mV/V
Interchanegeability: Matched for mv/v and shunt calibration +0.3% FS
Nonlinearity: +0.2% FS
Excitation Recommended: 10V DC or AC RMS
Bridge Resistance: 350 ohms
Usable Temperature Range: 41-122 degrees F
Mating Connector: Bendix PTO6A-10-65(SR)
Safe Overload: 125% of rated ouput
WARNING!
Not recommended for impact wrenches.
Item # 072005
For connecting to PTT or LTT
Item # 065181
For connecting to
Wizard Plus
Certified
Supplied with NIST-Traceable
Certification of Calibration