sT button is for activating Soft Start & Double hit modes.
Selectable output voltage:
- 20/30V for HIOS & EF Series drivers
- 30/38V for K Series drivers
Over Heat Protection (OHP) and Over Current
Protection (OCP) protect driver from damage or malfunction.
Temperature Detection powers down the unit and resets automatically when unit restores to acceptable levels.
Switchable 110V & 230V input voltage. Unit will reset itself if motor/current overload is too high.
Start & Stop Signal Output (for PLC).
Selectable Soft Start (from 0.2-0.6 seconds)*.
Selectable Double Hit Mode for soft joint applications*.
Screwdriver Lock Signal Input (for PLC).
Unit can be connected to the Scout (Screw Counter).
Specifications:
Rated Output: 2.5A
Max. Output: 5A
Output VDC: 20/30V or 30/38V
Input VAC: 110/230V
Size inches (W x D x H): 4 3/8 x 7 1/2 x 2 3/8
Weight: 1.8 lbs.
Model: STC30 Plus v4.1
Item # 145683
Operates: A-Series, CL-Series, EF-Series, & K-Series
Model: STC30 Plus v4.1 for SS-Series & ESD-Series
Item # 145684
Model: STC30 Plus v4.2 for BF-Series (features driver lock)
Item # 145699
* Note: For STC Plus 4.1 Only
Select EF Mode* (20/30 V) For Operating the following drivers:
A-Series: A4500 - A5000
CL-Series: CL2000 - 7000
SS-Series: SS2000- 7000
EF-Series: EF150 - 180
Select K Mode* (30/38 V)
For Operating the following drivers:
K-Series: K150F - 450
Operating Instructions for STC30 Plus v2.0
Operating Instructions for STC30 Plus v1.3
Operating Instructions for STC30 Plus v3.0
Operating Instructions for STC30 Plus v4.0
Operating Instructions for STC30 Plus v4.1
